The maintenance cycle of high-pressure pump mainly includes daily inspection, regular maintenance and special maintenance and maintenance. The specific steps are as follows:
Check lubricating oil: Check the lubricating oil level in the crankcase of the high-pressure pump every day to ensure that the lubricating oil is sufficient and clean. It is recommended to replace the lubricating oil every three months.
Check the seals: Check the seals of the pump, such as O-rings or gaskets, every month. If they are worn or aged, they should be replaced in time to prevent leakage.
Disassemble and clean the high-pressure pump: Disassemble and clean the high-pressure pump every three months to remove the dirt and sediment accumulated inside.
External cleaning: Regularly use a damp cloth or soft brush to gently wipe the external surface of the high-pressure cleaning pump to remove dust, dirt and oil stains to keep the equipment clean.
Release pressure: After each use of the high-pressure cleaning pump, make sure that all pressure in the hose is released.
Remove the hose: After each use of the high-pressure cleaning pump, remove all hoses installed on the cleaning pump to prevent damage due to long-term pressure.
Long-term storage: If the cleaning pump is not used for a long time, it should be stored in a dry and ventilated place, and necessary anti-corrosion measures should be taken, such as draining the water source and flushing the system to prevent internal rust and corrosion.
.
Personal protection: Wear personal protective equipment when using and avoid direct contact with the high-pressure nozzle to avoid injury.
Professional maintenance: For the internal cleaning and maintenance of the high-pressure cleaning pump, it is recommended to be operated by professionals to ensure the correctness and safety of the equipment.